12/1/2022 0 Comments Bypass dongle request![]() The fact that the Firm Access Counter (FAC) has a value of 0 can have various causes:ġ. For a description how to do this, see => KB-0110. Switch CmDongle USB device class from Human Interface (HID) to mass storage (MSD). Update the firmware of the CmDongle if this should not work eventually the CmDongle is defect. Moreover, you can check whether you already use the latest USB or chipset driver and if not, can install them.įorm a CodeMeter point of view, the following options exist you should also attempt: If you use a USB Hub, try to do without it or use a self-powered USB Hub to exclude power problems. Our experience is, that USB ports at the back of the PC work better than the one on the front. Another step covers to try another USB port of the PC on which the error occurs. ![]() If the CmDongle performs trouble-free, you can exclude a defect CmDongle. ![]() In a first step to limit possible causes, attempt to use the CmDongle for another PC. power supply, chipset driver, eventually drivers of Virtual Machines (VM), etc. The possible reason for the failed communication between CmDongle and 'CodeMeter.exe' are varied, e.g. If the communication after several attempts still fails, finally Error 70 displays and no further communication attempts with this CmDongle are performed. If those errors display, errors in the USB communication with the CmDongle have been occurred. by executing the command: cmu32 -s -set-config-disk ZeroBoot If this hasn't helped, you can try other boot codes. Please check the booting behavior and functionality in default operations. Reconfigure your CmDongle to be detected as removable device.Įxecute: cmu32 -s -set-config-disk RemovableDisk Open a CodeMeter Command Prompt using "Start | All Programs | CodeMeter | Tools | CodeMeter Command Prompt".Įxecute the following command, replacing the with your CmDongle serial number, e.g. You can reconfigure your CmDongle as a removable device as follows:ġ. ![]() The boot problem appears mostly for CmDongles configured as local disks. CmDongle can be configured to be detected as a local disk or removable disk. This behavior can be avoided by reconfiguring your system. ![]() This happens because the system tries to boot from the CmDongle and receives responses it does not understand. CodeMeter with a SAP back office solutionĭepending on the BIOS and the configuration of the boot manager of your system, it might occur that your system hangs during boot procedure.SAP Entitlement Management and CodeMeter. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |